PIR Motion Sensors & Switches

PIR Motion Sensors / Energy Saving Sensors / Security Sensors

Brief Introduction:

The PIR Motion Sensor Switch can detect the Infrared Rays released by human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range / coverage area & when there is no presence the light will be deactivated automatically.

Reduce Your Electricity Bill

Electricity:
It has been estimated that a single unit of energy saved at the end use point is equal to 2.3 units of energy produced.

If energy efficient methods are mplemented properly about 25000mw equivalent capacity of power can be created through promotion of energy efficient measures.

PIR Motion Sensor for Automatic Light Control

PIR Motion Sensor is a fully automatic indoor and outdoor security / courtesy light controller capable of controlling up to 2000W incandescent or 30W x 20 fluorescent of lighting in day as well as at night. The built–in Passive Infrared (PIR) Motion Sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in Photocell Sensor saves electricity by deactivating the lights. You can reduce your electricity bills by using PIR Motion Sensors & Occupancy Sensors.

An adjustable time knob lets you select how long the light stays on after activation & thus stops the wastage of electricity. In the evening or at night, you can also manage at what time the lights should become ON by the LUX adjustment knob provided in the Sensor.

Energy Saving Sensor:

By the use of PIR Sensor, considerable energy can be saved by switching off the lights when the space is not in use. Savings are huge in larger facilities.

It has been estimated that a single unit of energy saved at the end use point is equal to 2.3 units of energy produced.

If energy efficient methods are implemented properly about 25000 MW equivalent capacity of power can be saved through promotion of energy efficient measures

PIR Motion Sensor for Security of Houses

If PIR Motion Sensors is installed in front yard or back yard of your house, it works as Security Sensor in nights. As if any body jumps or sneaks within its detection range, the connected lights / Sirens or beeps can be activated automatically to create Panic to the Intruder.

Working Principle: -

• The PIR Sensor senses the motion of a human body by the change in surrounding ambient temperature when a human body passes across.

• Then it turns on the lighting load to which it is connected.

• The lighting load will remain ON until it senses motion.

• Once the motion is seized it switches OFF the lighting load.

• During the night, the LUX adjustment knob allows you to adjust the luminosity based on which the lighting load will either switch on / off automatically.

Applications: -

·    Common toilets, for lights & exhaust fans
·    Common staircase / Entrance / Basements
·    Parking areas / garden lights
·    Living room, Malls, ATMS
·    Changing rooms in shops
·    Offices / Conference Room
·    Corridors & many more!

Advantages: -

• PIR Motion Sensors will itself recover its cost by reducing your electricity bills and will further save your electricity cost for the future.

• Very easy installation and can be installed by in – house technician itself.

• No separate wiring is required hence no additional installation cost.

• No modification is required and complies with current aesthetics.

• Pay back within ten months according to residential meter and six months according to construction meter.

 

Approximate saving with cost estimate:
S. No. For Residential Meter Without  PIR Motion Sensor With PIR Motion Sensor
1 Power capacity of one tube light in watt 40 40
2 Operational hours of corridor tube lights 12 3
3 Total consumption in watts per day 480 120
4 Number of days in a month 30 30
5 Total power used by one tube light in kw 14400W = 14.4 KW 3600W = 3.6 KW
6 Cost of electricity per kw in Rupees 4.5 4.5
7 Amount paid per month @ Rs. 4.50 per unit 64.8 16.2
8 Savings per month per 1 tube light in Rupees.   48.6

Hamilton Electronics Pvt. Ltd. , is an ISO 9001 : 2000 Certified Company , engaged in the manufacturing of Switches & Sensors for Security Alarm Systems , Magnetic Door Contacts, Magnetic Security Switches and host of other Sensors.

Click Here To Visit

PIR Sensors passive infrared detector that will give you the edges over the competition and secure your business contract in today's price oriented market. The company has a consistent record of growth and expansion with fast increasing sales turnover since its inception.

Click Here To Visit

Float Sensor is an electrical ON/OFF Switch, which operates automatically when liquid level goes up or down with respect to specified level. The Signal thus available from the Float Sensor can be utilized for control of a Motor Pump or an allied electrical element like Solenoid, Lamps.

Click Here To Visit